Velor Works Product Fitment & Support Guide
This guide summarizes current Velor Works product fitment, installation, and support information. If a vehicle or installation situation is not specifically covered below, contact info@velorworks.com before ordering or installing. Include the vehicle year, model, trim, and clear photos of the intended mounting area whenever possible.
Illuminated M-BLEM
The Velor Works Illuminated M-BLEM is designed for the factory grille-emblem location on the supported BMW M applications below. Competition and non-Competition lettering options are available.
- BMW M3: G80, 2021–present
- BMW M4: G82 / G83, 2021–present
- BMW M5: F90 and current-generation G90
- BMW X5 M: F95, 2020–present, including pre-LCI and LCI
The M-BLEM uses a 12V hardwire system. No drilling or cutting is required. The included wireless remote provides on/off and brightness control. Installation can use the included mounting clips or VHB adhesive depending on the application.
Illuminated PERFORMANCE LED License Plate Frame
This frame is a universal fit for vehicles using the standard U.S./North American 12 × 6 inch license plate format and mounts through the existing plate screw locations. No drilling or cutting is required.
The top VELOR marking is not illuminated. PERFORMANCE and the fixed light blue, dark blue, and red accent bars illuminate together. The kit uses a 12V hardwire system and includes the wiring package, add-a-fuse, inline fuse, voltage stabilizer, controller, remote, mounting hardware, and instructions.
View the Illuminated PERFORMANCE License Plate Frame
250 mm Tri-Color Door Ambient Light — Universal Left + Right Pair
This product is universal rather than vehicle-specific. The kit includes two 250 mm blades: one left and one right. It is designed around an approximately 2 mm trim gap where the surrounding trim geometry allows.
Each blade uses a positive 12V and ground connection and is intended to piggyback from a suitable existing interior lighting circuit, such as door ambient lighting or footwell lighting. The full blade and illuminated M end detail light simultaneously. There is no RGB cycling, app, or remote.
View the 250 mm Door Ambient Light Pair
Cabin Tri-Color LED Cup Holder Light
The Cabin Tri-Color LED Light measures 190 × 12 × 8 mm and uses fixed Ice Blue, Marine Blue, and Red illumination. Cup-holder and center-console areas are the primary use cases, but other cabin locations can work where there is enough clearance and safe electrical access.
Before permanent installation, verify physical clearance and keep wiring away from airbags, pedals, seat tracks, moving trim, and other safety equipment.
View the Cabin Tri-Color LED Light
Universal Illuminated M Emblem — 5V USB
The Velor Works Universal Illuminated M Emblem is a slim 5V USB-powered illuminated accent designed for flexible placement inside or outside the vehicle. It is not limited to the grille and is not a factory clip-in replacement. Two sizes are available: Standard 150 × 55 mm and Compact 120 × 42 mm, approximate depth 10 mm. Power: 5V USB-A — no 12V hardwire required.
Confirm dimensions, clearance, mounting method and USB cable routing before installation. For exterior use, keep the USB connection and wiring protected from direct water exposure and verify that the mounting location is appropriate for the environment.
View the Universal Illuminated M Emblem
3W USB Logo Projector — Signature / Velocity
The Velor Works 3W USB Logo Projector is USB-powered — simple plug-in operation with no hardwiring or permanent installation. Connect the projector to a compatible USB power source, position the flexible gooseneck, and aim the projection at your preferred surface. Choose the Signature or Velocity projection; one selected projection insert is included.
Projection size, sharpness, and visible brightness vary with projection distance, surface, and ambient lighting. For best results, use in darker environments.
View the 3W USB Logo Projector
Fitment Questions
For products labeled universal, compatibility depends on available space, mounting geometry, and safe access to the correct power source. The Universal Illuminated M Emblem and the 3W USB Logo Projector are USB-powered and do not require 12V hardwiring. The Illuminated M-BLEM, Illuminated PERFORMANCE License Plate Frame, and 250 mm Door Ambient Light Pair require a suitable 12V electrical connection. A universal designation does not guarantee fit in every location on every vehicle.
For uncertain fitment, contact info@velorworks.com with the vehicle year, make, model, trim, and clear photos of the intended mounting area. Velor Works can help evaluate the application before purchase.
Shipping, Returns, Warranty & Installation
For the latest terms, refer to the official store policies:
Brand Notice
Velor Works is an independent aftermarket brand. Vehicle manufacturer names, model names, trademarks, and vehicle images are used only to identify compatibility or illustrate intended fitment. No affiliation, sponsorship, approval, or endorsement by any vehicle manufacturer is claimed unless expressly stated.